Certification and Registration
ISTA 6-Amazon-SIOC Type H Test Method
Category:
Package
Amazon Type H testing applies to individual packaged televisions or monitors weighing greater than 150 lb (68 kg) or with a girth greater than 165 inches (4.19 m) that are shipped via less-than-truckload (LTL). These products use the standard handling shipping method. Girth is calculated as L + 2(W + H).
The standard handling shipping method is also referred to as floor-loaded, and applies to products received at Amazon fulfillment centers as individual packages without pallets, or multiple packaged products on a single pallet but sold to consumers without the pallet.
Less-than-truckload (LTL) refers to a shipping method where a shipment's weight or volume is insufficient to fill an entire truck (not meeting full truckload requirements), and therefore shares a truck with other cargo
Television/monitor products are defined as any package containing a television or monitor as the primary product. Amazon packaging testing has created a separate test category for televisions and monitors because they possess distinct characteristics that differentiate them from other packages. It should be noted that televisions and monitors are considered non-fragile items and therefore require only one sample for testing.
The purpose of Amazon packaging test Type H is to evaluate the protective performance of television/monitor packaging and obtain ISTA 6 Amazon SIOC certification. The packaged product will be subjected to vibration, impact, and other stress-related tests that simulate the hazards encountered during transportation to the customer.
Products that pass the test sequence listed in the table below may qualify for Amazon SIOC (Ships in Own Container) certification.
|
Type H – Individual packaged televisions/monitors weighing less than 150 lb (68 kg) with girth less than 165 inches (4.19 m) |
||||
|
Test sequence |
Test Type |
Test Content |
Test level |
Note |
|
1 |
Atmospheric Preprocessing |
Temperature and humidity |
Laboratory environment, 12 hours |
Essential |
|
2 |
Atmospheric regulation |
Controlled temperature and humidity |
Select temperature and humidity from the list provided by the standard, taking into account the actual conditions. |
Optional |
|
3 |
Impact |
Overturn |
Use a tilt angle of 22°. |
For packaged products with a height of ≥48 in. (1.2 m) and a bottom dimension on any side less than half that height; or with a height of ≥30 in. (760 mm) and a center‑to‑bottom vertical distance greater than half the package height. |
|
4 |
Impact |
Free fall |
6 Drop height—up to 18 in (460 mm) |
For packages weighing ≤100 lbs (45 kg) |
|
5 |
Impact |
Rotational plane drop |
9 Inches (230 mm) |
Essential |
|
6 |
Impact |
Rotating edge drop |
9 Inches (230 mm) |
Essential |
|
7 |
Impact |
Tilted or horizontal impact |
48 in/sec (4 ft/sec) (1.2 m/sec) Impact speed or higher |
For packages weighing ≤100 lbs (45 kg) |
|
8 |
Horizontal compression |
Simulated gripping |
Calculate according to the formula and clamp in multiple directions as instructed. |
Any two axes with a width dimension ≥ 24 in (610 mm) and < 75 in (1905 mm) |
|
9 |
Vertical compression |
In the intended direction of product transportation |
Calculate the holding force according to the formula, and test for 1 hour. |
Essential |
|
10 |
Vibration |
Random vibration with load |
The overall Grms level is 0.54. |
Essential |
|
11 |
Impact |
Free fall |
6 Drop height—up to 32 in (810 mm) |
For packages weighing ≤100 lbs (45 kg) |
|
12 |
Impact |
Tilted or horizontal impact |
48 in/sec (4 ft/sec) (1.2 m/sec) Impact speed or higher |
For packages weighing ≤100 lbs (45 kg) |
|
13 |
Impact |
Rotational plane drop |
Subject to the package dimensions. |
Essential |
|
14 |
Impact |
Concentrated Edge Impact Test |
Drop height 16 in (406 mm) |
Must—Danger box smashed against one side of the screen. |
Horizontal Compression Test
Vertical Compression Test
◉ Shorten time-to-market
◉ Increase confidence in product launches
◉ Reduce product damage and loss
◉ Balance distribution costs
◉ Enhance customer satisfaction and help increase market share
Recertification is required when any of the following occurs:
◉ Any change to the packaging
◉ Any change to the product design
◉ Damage is observed by Amazon during the delivery of products to customers
SATISFY provide authoritative SIOC certification reports recognized by Amazon. Contact SATISFY Customer Service for more information on Amazon packaging testing.
Note: The above testing methods are derived from ISTA 6-Amazon.com-SIOC , The shared content is for reference only.
Related Links:
◉ ISTA 6 Amazon Packaging Testing
Related Information
SATISFY TECH AND SERVICE LLC
SATISFY TECH AND SERVICE LLC delivers full-lifecycle technical solutions for children’s products, hygiene care, protective equipment, furniture, and building materials. Our framework spans compliance pre-assessment, standard upgrading, and risk control. We empower manufacturers and exporters through expert testing, certification, consulting, and standards interpretation.
Contact Us
Address: Room 7D, Building A, Zhongzhou Holdings Financial Center, No. 88 Haide 1st Road, Haizhu Community, Yuehai Subdistrict, Nanshan District, Shenzhen
Phone: 0755-8273-9683
Mobile: 189-2676-2893
Email: info@sdswcn.com
Sales Window
WeChat Applet