Certification and Registration
Adiabatic performance
Category:
Adiabatic
The environmental friendliness of building materials is reflected not only in the control of chemical hazards but also in their thermal insulation performance. In simple terms, it refers to the heat retention performance of materials. Thermal insulation performance can be evaluated through Thermal conductivity. Thermal conductivity refers to the amount of heat transferred through a material with a thickness of 1 m and an area of 1 m² within 1 hour under steady-state heat transfer conditions, when the temperature difference between the two surfaces is 1 K (or °C). Generally, thermal insulation materials refer to materials with a Thermal conductivity ≤ 0.2.
|
Building thermal insulation materials are typically classified according to their material composition. |
||
|
Organic thermal insulation material |
Inorganic insulation material |
Metallic insulation material |
|
Building thermal insulation materials classified by form |
|||
|
Porous thermal insulation material |
Fibrous thermal insulation material |
Powdered insulation material |
Layered thermal insulation material |
In general, thermal insulation materials share common characteristics such as being lightweight, porous, and having a cellular or fibrous structure. They reduce heat transfer by using the trapped air inside the material to block thermal conduction.
Common building thermal insulation material product regulations include:
ASTM C533-13 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
ASTM C610-11 Standard specification for molded expanded perlite block and pipe thermal insulation
ASTM C612-14 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ASTM C552-15 Standard Specification for cellular glass thermal insulation
ASTM C592-13 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
EN 13162:2012 Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
EN 13163:2012+A1:2015 Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification
EN 13164:2012 Thermal insulation products for buildings—Factory made products of extruded polystyrene foam (XPS)—Specification
EN 13165:2012 Thermal insulation products for buildings—Factory made rigid polyurethane foam (PUR) products—Specification
EN 13166:2012 Thermal insulation products for buildings—Factory made phenolic foam (PF) products—Specification
EN 13496:2013 Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS)
EN 14304:2009+A1:2013 Thermal insulation products for building equipment and industrial installations-Factory made flexible elastomeric foam (FEF) products-Specification
EN 14306:2009+A1:2013 Thermal insulation products for building equipment and industrial installations-Factory made calcium silicate (CS) products-Specification
EN 14308:2009+A1:2013 Thermal insulation products for building equipment and industrial installation-Factory made rigid polyurethane foam(PUR) and polyisocyanurate foam (PIR) products-Specification
According to the requirements of the California Home Furnishings and Thermal Insulation Act and Rules and Regulations, all thermal insulation materials must be registered with the California BEARHFTI before being distributed, sold, or used in California.
According to the regulation, thermal insulation materials are defined as materials used in buildings, appliances, or structures that are intended to reduce heat transfer or heat loss. These materials include:
|
Cellulose Fiber |
Isocyanurate |
Polystyrene |
Urea-Formaldehyde |
|
Cellular Glass |
Mineral Aggregate |
Reflective Foil |
Urethane |
|
Fiber Glass |
Perlite |
Rock Wool |
Vermiculite |
|
Other |
|||
SATISFY provides registration services for the California Thermal Insulation Manufacturer License. For more information, please contact SATISFY.
Previous page
Next page
Previous page
Next page
Related Information
SATISFY TECH AND SERVICE LLC
SATISFY TECH AND SERVICE LLC delivers full-lifecycle technical solutions for children’s products, hygiene care, protective equipment, furniture, and building materials. Our framework spans compliance pre-assessment, standard upgrading, and risk control. We empower manufacturers and exporters through expert testing, certification, consulting, and standards interpretation.
Contact Us
Address: Room 7D, Building A, Zhongzhou Holdings Financial Center, No. 88 Haide 1st Road, Haizhu Community, Yuehai Subdistrict, Nanshan District, Shenzhen
Phone: 0755-8273-9683
Mobile: 189-2676-2893
Email: info@sdswcn.com
Sales Window
WeChat Applet