Certification and Registration
Mechanical
Category:
Mechanical
Mechanical Properties Testing of Building Materials
The mechanical properties of building materials refer to the deformation behavior and failure characteristics under external forces or other conditions, including tensile, compressive, bending, torsional, impact and cyclic stress properties. To ensure materials perform properly under different conditions, mechanical properties must be tested and compared with relevant standard requirements to determine whether the materials meet the specified criteria.
Stone, ceramic tiles, wood, metal and other building materials have specific mechanical property requirements based on their intended applications, such as hardness, flexural strength, bending strength, compressive strength and impact resistance.
|
Polymer Materials |
Metal Materials |
Non-Metallic Inorganic Materials |
|
Tensile Strength |
Compressive Strength |
Compressive Strength |
|
Flexural Strength |
Tensile Strength |
Flexural Strength |
|
Shear Strength |
Shear Strength |
Abrasion Resistance |
|
Tear Strength |
Bending Strength |
Fracture Toughness |
|
Low-Temperature Impact Resistance |
Compression Test |
Shear Strength |
|
Cantilever Impact Test |
Pull-Out Test |
Impact Resistance |
|
Falling Ball Impact Test |
Edge Load Test |
Mohs Hardness |
|
Shore Hardness |
Impact Test |
Vickers Hardness |
|
Adhesion Strength |
Cup Test |
|
|
Coefficient of Friction |
Torsional Friction Test |
|
|
Compressive Strength |
Brinell Hardness |
|
|
Density |
Rockwell Hardness |
|
|
Falling Ball Impact Test |
Vickers Hardness |
|
|
Falling Dart Impact Test |
Microhardness Test |
|
|
Ball Impact Test |
Leeb Hardness |
|
|
Scratch Resistance Test |
|
|
|
Wear Resistance |
|
|
|
Peel Strength |
|
|
|
|
|
Relevant Test Standards:
Hardness:
ASTM D2240 ， ASTM D785 ， ASTM D2583 ， ASTM D1415 ，
ISO 868 ， ISO 2039-1 ， ISO 2039-2 ， ISO 7619-1 ， ISO 48 ，
GB/T 2411 ， GB/T 3398.2 ， GB/T 3854 ， GB/T 531.1 ， GB/T 6031
Tensile:
ASTM D638 ， ASTM D1784 ， ASTM D2671 ， ASTM D412 ， ASTM D 638
ISO 527-2 ， ISO 37 ，
GB/T 1040.2 ， GB/T 528 ， GB/T 3849
BS EN ISO 6892
Flexural:
ISO 178 ， ISO 14125 ，
GB/T 9341 ， GB/T 12626.9 ， GB/T 1449 ， GB/T 3356
BS EN 196
Other physical tests:
AS/NZS 3662 ， AS/NZS 3718 ， ASTM C232
BS 1881 ， BS 3892 ， BS 5328 ， BS 812 ， BS EN 1008 ， BS EN 12350 ， BS EN 12390 ， BS EN 15167 ， BS EN 196 ， BS EN 413 ， BS EN 450 ， BS EN 451 ， BS EN 480 ， BS EN 932 ， BS EN 933 ， BS EN 934 ， RILEM TC 106
Related Information
SATISFY TECH AND SERVICE LLC
SATISFY TECH AND SERVICE LLC delivers full-lifecycle technical solutions for children’s products, hygiene care, protective equipment, furniture, and building materials. Our framework spans compliance pre-assessment, standard upgrading, and risk control. We empower manufacturers and exporters through expert testing, certification, consulting, and standards interpretation.
Contact Us
Address: Room 7D, Building A, Zhongzhou Holdings Financial Center, No. 88 Haide 1st Road, Haizhu Community, Yuehai Subdistrict, Nanshan District, Shenzhen
Phone: 0755-8273-9683
Mobile: 189-2676-2893
Email: info@sdswcn.com
Sales Window
WeChat Applet