Certification and Registration
Quantitative compositional analysis and DMA testing capabilities
Category:
Quantitative compositional analysis and DMA testing capabilities
Routine Quantitative Analysis
Quantitative Analysis of Artificial Leather
PGC-MS: Pyrolysis Gas Chromatography-Mass Spectrometry
DSC: Differential Scanning Calorimetry
XRF: X-ray Fluorescence Spectroscopy
FTIR: Fourier Transform Infrared Spectroscopy
Physical Separation Method
Chemical Separation Method
TGA
High-Temperature Calcination
Quantitative Analysis of Vinyl Acetate(TGA Method)
HS/T 9-2018 Rapid Analysis Method for Vinyl Acetate Content in Ethylene-Vinyl Acetate Copolymers - Thermogravimetric Method
Acrylic Acid Copolymers (EAA)
ASTM D4094-07 Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
Quantitative Analysis of Fillers and Reinforced Materials
FTIR: Fourier Transform Infrared Spectroscopy
XRF: X-ray Fluorescence Spectroscopy
ICP: Inductively Coupled Plasma Emission Spectrometry
High-Temperature Calcination
Acid Digestion
Other Instrumental Analysis Methods
Quantitative Analysis of Resins in Plastic
PGC-MS: Pyrolysis Gas Chromatography-Mass Spectrometry
DSC: Differential Scanning Calorimetry
FTIR: Fourier Transform Infrared Spectroscopy
Chemical Separation Method
TGA
Quantitative Analysis of Plastic Materials and Products, Quantitative Analysis of Rubber Raw Materials and Products, Quantitative Analysis of Adhesives and Paints and Inks
FTIR: Fourier Transform Infrared Spectroscopy
PGC-MS: Pyrolysis Gas Chromatography-Mass Spectrometry
XRF: X-ray Fluorescence Spectroscopy
Chemical Separation Method
Physical Separation Method
Label Quantitative Analysis of Product
FTIR: Fourier Transform Infrared Spectroscopy
PGC-MS: Pyrolysis Gas Chromatography-Mass Spectrometry
XRF: X-ray Fluorescence Spectroscopy
Chemical Separation Method
Physical Separation Method
Nitrogen Content
GB/T 8088-2008 Rubber raw natural and rubber latex natural - Determination of nitrogen content
GB/T 7766-2008 Section 5.4 Acrylonitrile monomer content in nitrile rubber
Rubber products - Test methods for chemical analysis
Quantitative Analysis of Natural Latex
ASTM D5712-15 (Modified Lowry Method) Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
PGC-MS: Pyrolysis Gas Chromatography-Mass Spectrometry
XRF: X-ray Fluorescence Spectroscopy
FTIR: Fourier Transform Infrared Spectroscopy
HG/T 5644-2019 Section 6.4 Latex pillows and latex protective gloves
TGA:
Chemical Separation Method
Medium-Temperature Pyrolysis
High-Temperature Calcination
Quantitative Analysis of Degradable Materials
FTIR: Fourier Transform Infrared Spectroscopy
PGC-MS: Pyrolysis Gas Chromatography-Mass Spectrometry
XRF: X-ray Fluorescence Spectroscopy
Chemical Separation Method
Physical Separation Method
Starch Content
QB/T 2957-2008 (Starch-based plastics) Determination of starch content of starch-based plastics - Thermogravimetry (TG)
Quantitative Analysis of Mixed Organic Solvents
GB/T 9722-2006 Chemical reagents - General rules for gas chromatography
Quantitative Analysis of Aqueous Extractable Protein in Latex Natural Latex / Natural Rubber
ASTM D5712-15 Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
ISO 12243:2003 Medical gloves made from natural rubber latex. Determination of water-extractable protein using the modified Lowry method
GB/T 21870-2008 Medical gloves made from natural rubber latex. Determination of water-extractable protein using the modified Lowry method
Isocyanate group content in polyurethane raw materials (NCO Value )
ASTM D5155-19 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
HG/T 2409-1992
GB/T 12009.4-2016
ASTM D2572-19 Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluene sulfonyl Isocyanate(TSI)and Potentiometric Titration with Tetrabutylammonium Hydroxide
ASTM E1899-16 Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluene sulfonyl Isocyanate(TSI)and Potentiometric Titration with Tetrabutylammonium Hydroxide
Standard Test Method for Epoxy Content of Epoxy Resins
ASTM D1652-11Ɛ1 Standard Test Method for Epoxy Content of Epoxy Resin
Comprehensive Analysis
Comprehensive Analysis of Compositions in Plastic Products， Comprehensive Analysis of Compositions in Rubber Products
FTIR: Fourier Transform Infrared Spectroscopy
PGC-MS: Pyrolysis Gas Chromatography-Mass Spectrometry
XRF: X-ray Fluorescence Spectroscopy
Chemical Separation Method
Physical Separation Method
Other Others
Polymer Material Comparison Test
ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - General principles
ASTM E1252-98(2013)ε1 (General method) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ISO 4650:2012 (Rubber) Rubber - Identification - Infrared spectrometric methods
ISO 11357-3:2018 (Plastics) Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-2:2020 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height
Fracture Analysis
SEM: Scanning Electron Microscopy
EDS: Energy Dispersive X-Ray Spectroscopy
Element Analysis
EDS: Energy Dispersive X-Ray Spectroscopy
SEM: Scanning Electron Microscopy
Molecular Weight of Polymer and Polymer Dispersity Index
GB/T 21863-2008 Gel permeation chromatography (GPC) - Tetrahydrofuran as elution solvent
ISO 13885-1:2020 Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent
DMA Testing Capability
Plastics: Dynamic Mechanical Properties
ISO 6721-4:2019 Plastics - Determination of dynamic mechanical properties - Part 4: Tensile vibration - Non-resonance method
ASTM D5024-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM D5418-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM D4065-12 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
ISO 6721-1:2019 Plastics - Determination of dynamic mechanical properties - Part 1: General principles
ASTM D5023-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ISO 6721-5:2019 Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method
ASTM D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
DMA Tg Testing
ASTM E1640-18 Standard Test Method for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis
ISO 6721-11:2019 Plastics - Determination of dynamic mechanical properties - Part 11: Glass transition temperature
GB/T 4722-2017 Section 6.7.2 Test methods for rigid copper clad laminates for printed circuit boards
ASTM D5418-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
ASTM D7028-07(R2015) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
Previous page
Related Information
SATISFY TECH AND SERVICE LLC
SATISFY TECH AND SERVICE LLC delivers full-lifecycle technical solutions for children’s products, hygiene care, protective equipment, furniture, and building materials. Our framework spans compliance pre-assessment, standard upgrading, and risk control. We empower manufacturers and exporters through expert testing, certification, consulting, and standards interpretation.
Contact Us
Address: Room 7D, Building A, Zhongzhou Holdings Financial Center, No. 88 Haide 1st Road, Haizhu Community, Yuehai Subdistrict, Nanshan District, Shenzhen
Phone: 0755-8273-9683
Mobile: 189-2676-2893
Email: info@sdswcn.com
Sales Window
WeChat Applet