Certification and Registration
Temperature and humidity aging resistance
Category:
Temperature and humidity aging resistance
High Temperature Test
ASTM D573-04(2015) (Rubber) Standard Test Method for Rubber - Deterioration in an Air Oven
ISO 188:2011 Method A/B (Rubber) Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
JIS K6257:2017 Method A/B (Rubber or thermoplastic elastomers) Rubber, vulcanized or thermoplastic - Determination of heat ageing properties
DIN 53508:2000 (Rubber) Testing of rubber - Accelerated ageing
GB/T 3512-2014 Method A/B (Rubber) Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
GB/T 30680-2014 Clause 5.3.3 Fluorine rubber sheet - General technical conditions
GB/T 30308-2013 Fluoroelastomers - General specification and procedure of evaluation
ASTM D3045-18 (Plastics) Standard Practice for Heat Aging of Plastics Without Load
GB/T 1735-2009 (Paints and varnishes) Paints and varnishes - Determination of heat resistance
T/ZZB 0427-2018 Clause 5.4.13 Group standard for water-based UV-curable coatings
ISO 3248:2016 (Paints and varnishes) Paints and varnishes - Determination of the effect of heat
GB/T 14274-2003 (Polymeric cellular flexible materials) Polymeric materials cellular flexible - Accelerated ageing tests
GB/T 7141-2008 (Plastics) Method B Plastics - Methods of heat aging
Low Temperature Test
Customer provided
Constant Temperature and Humidity Test
ASTM D2126-15 (Rigid cellular plastics) Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
GB/T 1740-2007 (Paints) Determination of resistance to heat and humidity of paint films
ISO 4611:2010 (Plastics) Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
GB/T 12000-2017 (Plastics) Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
GB/T 15905-1995 (Vulcanized rubber) Rubber, vulcanized - Test method of damp heat aging
ANSI/SAE Z26.1-1996 Section 5.3 Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety Standard
Temperature and Humidity Cycling Test Temperature and humidity cyclic test
customer-provided method
Steam autoclave aging
IPC-TM-650 2.6.16:1985 Environmental Test Methods
ASTM D3574-17 Test J Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams
ISO 2440:2019 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
GB/T 9640-2008 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
Water spray test
ASTM D1735-14 (Coatings) Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ISO 4611:2010 (Plastics) Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
GB/T 12000-2017 (Plastics) Plastics - Determination of the effects of exposure to damp heat, water spray and salt mis
Water spray test
ASTM D1735-14 (Coatings) Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ISO 4611:2010 (Plastics) Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
GB/T 12000-2017 (Plastics) Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist
Condensation Test
ASTM D4585/D4585M-18 (Coatings) Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
GB/T 13893-2008 (Paints and varnishes) Paints and varnishes - Determination of resistance to humidity - Continuous condensation
ISO 6270-1:2017 (Paints and varnishes) Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation
ISO 12944-6:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods
100% Humidity Test
ISO 6270-2:2017 (Coatings) Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
ISO 11503:1995 (Coatings) Paints and varnishes - Determination of resistance to humidity (intermittent condensation)
ASTM D2247-15 (Coatings) Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
EN ISO 6270-2:2018 (Coatings) Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir)
GB/T 14274-2003 (Polymeric cellular flexible materials) Polymeric materials cellular flexible - Accelerated ageing tests
Thermal shock test for coating adhesion
FLTM BI107-05 Thermal Shock Test for Coating Adhesion
GM9525P-1988 Thermal Shock Test for Paint Adhesion
GMW 15919-2019 Thermal Shock Test for Paint Adhesion
Thermal Cycling Resistance
ASTM D6944-15 Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
Adhesive Laboratory Aging
ISO 9142-2003 Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints
Previous page
Related Information
SATISFY TECH AND SERVICE LLC
SATISFY TECH AND SERVICE LLC delivers full-lifecycle technical solutions for children’s products, hygiene care, protective equipment, furniture, and building materials. Our framework spans compliance pre-assessment, standard upgrading, and risk control. We empower manufacturers and exporters through expert testing, certification, consulting, and standards interpretation.
Contact Us
Address: Room 7D, Building A, Zhongzhou Holdings Financial Center, No. 88 Haide 1st Road, Haizhu Community, Yuehai Subdistrict, Nanshan District, Shenzhen
Phone: 0755-8273-9683
Mobile: 189-2676-2893
Email: info@sdswcn.com
Sales Window
WeChat Applet